Custom silicone molding
for branded products.

Custom molding means a mold made only for your part. We manage that process for products where colour, logo and finish are part of the brand.

MOQ: 1,000 pcs

Dispensing heads filling a mold plate

Custom silicone molding: the essentials.

Designing for molding is mostly about a few practical points. Colours need clear boundaries because each is filled separately. Walls should not be too thin, and the part has to release from the mold. Logos and textures are cut into the mold, so they are decided before tooling. We review your design against these points and explain any change we suggest, so you know why before you approve it.

Typical requests.

  • A multi-colour part for a consumer product
  • A molded logo and texture on one piece
  • A molded part combined with metal fittings

What to decide first.

Design for molding

Colour boundaries, wall thickness and release are checked on your design.

Colour and finish

Material colour, gloss level and texture are set and confirmed on a sample.

Assembly

Molded parts can be combined with plates, fittings or backings.

Two halves of a metal mold for a three-dimensional figure
A dedicated mold
Two-colour molded parts after demolding
Two-colour molded parts

From mold to finished part.

Photos from the partner production floor. A mold is made for each shape, material is filled colour by colour, and the parts are cured, released and finished.

From inquiry to shipment.

STEP 01

Inquiry

Tell us what you want to make, where it will be used and your target quantity.

STEP 02

Specification and quote

We organise material, shape, colours, attachment and packaging, then quote.

STEP 03

Sample

You check colour and finish on a physical sample, which becomes the approved standard.

STEP 04

Production

Partner factories in China produce to the approved sample.

STEP 05

Inspection and shipment

Goods are checked against the agreed standard and shipped directly from the factory.

Questions we are often asked.

What is the minimum order?

Our minimum order quantity is 1,000 pcs. Tell us your target quantity and we will confirm the conditions for your design.

Which molding method will be used?

We confirm the method that suits your shape and colours with the factory and explain it in the proposal.

Can we work in English?

Yes. We reply to international inquiries by email in English.

Company information.

Company
Tips LLC / 合同会社tips
Address
Hirakata VIE.ORNER 5F, 7-1 Okamotocho, Hirakata, Osaka 573-0031, Japan
Our role
Product planning, specification development and quality management
Made at
Partner factories in China
Contact
We reply by email in English. Send an inquiry.

About Tips LLC

From your brief to production.

MOQ: 1,000 pcs. Share your idea, quantity and destination.

Start an inquiry

We reply by email in English. Shipping terms are confirmed per project.