1. The mold
Your design is cut into metal. Depth differences create the raised and recessed areas.
A PVC patch starts as a logo cut into a metal mold. Colour is filled into the cavities one at a time, then the patch is cured and released. Here is the process, with photos from the partner production floor.
MOQ: 1,000 pcs

Knowing the process helps you design a patch that molds well. Each colour sits in its own cavity, separated by thin walls in the mold, so colours need clear boundaries. Very fine lines and tiny text are hard to fill reliably. Raised and recessed areas come from different depths in the mold, which is what gives a patch its relief. We check these points on your artwork before a mold is made.
Your design is cut into metal. Depth differences create the raised and recessed areas.
Nozzles dispense each colour into its cavity. More colours mean more filling steps.
The filled mold is cured, the patches are released, then separated and checked.


Photos from the partner production floor. A mold is made for each shape, material is filled colour by colour, and the parts are cured, released and finished.




Tell us what you want to make, where it will be used and your target quantity.
We organise material, shape, colours, attachment and packaging, then quote.
You check colour and finish on a physical sample, which becomes the approved standard.
Partner factories in China produce to the approved sample.
Goods are checked against the agreed standard and shipped directly from the factory.
Each colour is filled separately, so smooth gradients need another approach. We advise after seeing the design.
It depends on the design. We review the artwork and confirm how the colours can be divided.
Our minimum order quantity is 1,000 pcs. Tell us your target quantity and we will confirm the conditions for your design.
MOQ: 1,000 pcs. Share your idea, quantity and destination.
Start an inquiryWe reply by email in English. Shipping terms are confirmed per project.